TP-LINK 150Mbs Instrukcja Użytkownika Pobierz pdf (Strona 13)

TL-WR720N 150Mbps Wireless N Router

1.4.2 The Rear Panel

Figure 1-2 Rear Panel sketch

The following parts are located on the rear panel (View from left to right).

¾ WPS/RESET: This button is used for both WPS and Reset function. To use the WPS function,

press it for less than five seconds; to use the RESET function, press it for more than five

seconds.

z Used as RESET button:

There are two ways to reset to the Router's factory defaults:

1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the

Router's Web-based Utility.

2) Use the Factory Default Reset button: With the Router powered on, press and hold the

RESET button (at least 5 seconds) until the SYS LED becomes quick-flash from

slow-flash. Then release the button and wait the Router to reboot to its factory default

settings.

z Used as WPS button:

WPS: If you have client devices, such as wireless adapters, that support Wi-Fi Protected

Setup, then you can press this button to quickly establish a connection between the Router

and client devices and automatically configure wireless security for your wireless network.

¾ POWER: The Power socket is where you will connect the power adapter. Please use the

power adapter provided with this TL-WR720N 150Mbps Wireless N Router.

¾ WAN: The WAN port is where you will connect the DSL/cable Modem, or Ethernet.

¾ LAN (1-2): These ports connect the Router to the local PC(s).

-5-

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 108 109

Brak uwag

TP-LINK 150Mbs Instrukcja Użytkownika Strona 13